Instructions for use are available online on patek.com for over 200 watch models.

To select the instructions for use manual that applies to your watch model, please enter your watch reference and choose your reference and instructions manual.

NB: Instructions for use manuals are also available on the current watch collection pages, accessible under each featured watch model.

 
Ref.
Caliber
Instructions manual
Complication(s)
 
 
Ref.
3738/100
Caliber
240
Complication(s)


 
 
Ref.
4897
Caliber
215
Complication(s)


 
 
Ref.
4897/300
Caliber
215
Complication(s)


 
 
Ref.
4910/10
Caliber
E15
Complication(s)


 
 
Ref.
4910/11
Caliber
E15
Complication(s)


 
 
Ref.
4920
Caliber
E15
Complication(s)


 
 
Ref.
4968
Caliber
215 PS LU
Complication(s)


 
 
Ref.
4968/400
Caliber
215 PS LU
Complication(s)


 
 
Ref.
4972
Caliber
E15
Complication(s)


 
 
Ref.
4972/1
Caliber
E15
Complication(s)


 
 
Ref.
4973
Caliber
E15
Complication(s)


 
 
Ref.
5067
Caliber
E23-250 S C
Complication(s)


 
 
Ref.
5068
Caliber
324 S C
Complication(s)


 
 
Ref.
5072
Caliber
324 S C
Complication(s)


 
 
Ref.
5116
Caliber
215 PS
Complication(s)


 
 
Ref.
5119
Caliber
215 PS
Complication(s)


 
 
Ref.
5124
Caliber
25-21 REC PS
Complication(s)


 
 
Ref.
5131
Caliber
240 HU
Complication(s)


 
 
Ref.
5131/1
Caliber
240 HU
Complication(s)


 
 
Ref.
5139
Caliber
240 Q
Complication(s)



 
 
Ref.
5140
Caliber
240 Q
Complication(s)



 
 
Ref.
5146
Caliber
315 S IRM QA LU
Complication(s)


 
 
Ref.
5146/1
Caliber
315 S IRM QA LU
Complication(s)


 
 
Ref.
5147
Caliber
315 S IRM QA LU
Complication(s)


 
 
Ref.
5153
Caliber
324 S C
Complication(s)


 
 
Ref.
5159
Caliber
315 S QR
Complication(s)



 
 
Ref.
5160/500
Caliber
324 S QR
Complication(s)



 
 
Ref.
5164
Caliber
324 S C FUS
Complication(s)


 
 
Ref.
5167
Caliber
324 S C
Complication(s)


 
 
Ref.
5167/1
Caliber
324 S C
Complication(s)


 
 
Ref.
5168
Caliber
324 S C
Complication(s)


 
 
Ref.
5170
Caliber
CH 29-535 PS
Complication(s)


 
 
Ref.
5180/1
Caliber
240 SQU
Complication(s)


 
 
Ref.
5196
Caliber
215 PS
Complication(s)


 
 
Ref.
5200
Caliber
28-20 REC 8J PS IRM C J
Complication(s)


 
 
Ref.
5205
Caliber
324 S QA LU 24H/206
Complication(s)


 
 
Ref.
5227
Caliber
324 S C
Complication(s)


 
 
Ref.
5230
Caliber
240 HU
Complication(s)


 
 
Ref.
5235
Caliber
31-260 REG QA
Complication(s)


 
 
Ref.
5270
Caliber
CH 29-535 PS Q
Complication(s)



 
 
Ref.
5296
Caliber
324 S C
Complication(s)


 
 
Ref.
5297
Caliber
324 S C
Complication(s)


 
 
Ref.
5327
Caliber
240 Q
Complication(s)



 
 
Ref.
5396
Caliber
324 S QA LU 24H/303
Complication(s)


 
 
Ref.
5496
Caliber
324 S QR
Complication(s)



 
 
Ref.
5711/1
Caliber
315 S C
Complication(s)


 
 
Ref.
5712
Caliber
240 PS IRM C LU
Complication(s)


 
 
Ref.
5712/1
Caliber
240 PS IRM C LU
Complication(s)


 
 
Ref.
5719/10
Caliber
Complication(s)


 
 
Ref.
5724
Caliber
240 PS IRM C LU
Complication(s)


 
 
Ref.
5726
Caliber
324 S QA LU 24H/303
Complication(s)


 
 
Ref.
5726/1
Caliber
324 S QA LU 24H/303
Complication(s)


 
 
Ref.
5738
Caliber
240
Complication(s)


 
 
Ref.
5940
Caliber
240 Q
Complication(s)



 
 
Ref.
5960/01
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5960/1
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5961
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5980
Caliber
CH 28-520 C
Complication(s)


 
 
Ref.
5980/1
Caliber
CH 28-520 C
Complication(s)


 
 
Ref.
7010
Caliber
E23-250 S C
Complication(s)


 
 
Ref.
7010/1
Caliber
E23-250 S C
Complication(s)


 
 
Ref.
7014/1
Caliber
324 S C
Complication(s)


 
 
Ref.
7018/1
Caliber
324 S C
Complication(s)


 
 
Ref.
7021/1
Caliber
324 S C
Complication(s)


 
 
Ref.
7041
Caliber
215 PS
Complication(s)


 
 
Ref.
7099
Caliber
25-21 REC
Complication(s)


 
 
Ref.
7121
Caliber
215 PS LU
Complication(s)


 
 
Ref.
7121/1
Caliber
215 PS LU
Complication(s)


 
 
Ref.
7130
Caliber
240 HU
Complication(s)


 
 
Ref.
7140
Caliber
240 Q
Complication(s)



 
 
Ref.
7200
Caliber
240
Complication(s)


 
 
Ref.
7200/1
Caliber
240
Complication(s)


 
 
Ref.
7200/200
Caliber
240
Complication(s)


 
 
Ref.
972/1
Caliber
17''' LEP PS IRM
Complication(s)


 
 
Ref.
973
Caliber
17''' LEP PS
Complication(s)


 
 
Ref.
980
Caliber
17''' SAV PS
Complication(s)


 
 
Ref.
983
Caliber
17''' SAV PS IRM
Complication(s)


 
 
Ref.
5164
Caliber
324 S C FUS
Complication(s)


 
 
Ref.
5961
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5208
Caliber
R CH 27 PS QI
Complication(s)



 
 
Ref.
7000
Caliber
R 27 PS
Complication(s)


 
 
Ref.
6102
Caliber
240 LU CL C
Complication(s)


 
 
Ref.
4895
Caliber
215
Complication(s)


 
 
Ref.
5204
Caliber
CHR 29-535 PS Q
Complication(s)



 
 
Ref.
5304
Caliber
R 27 PS QR LU
Complication(s)



 
 
Ref.
5271
Caliber
CH 29-535 PS Q
Complication(s)



 
 
Ref.
5960/1
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5990/1
Caliber
CH 28-520 C FUS
Complication(s)


 
 
Ref.
4895
Caliber
215
Complication(s)


 
 
Ref.
5961
Caliber
CH 28-520 IRM QA 24H
Complication(s)


 
 
Ref.
5207/700
Caliber
R TO 27 PS QI
Complication(s)



 
 
Ref.
5496
Caliber
324 S QR
Complication(s)



 
 
Ref.
6102
Caliber
240 LU CL C
Complication(s)


 
 
Ref.
5940
Caliber
240 Q
Complication(s)



 
 
Ref.
5905
Caliber
CH 28-520 QA 24H
Complication(s)


 
 
Ref.
5905
Caliber
CH 28-520 QA 24H
Complication(s)


 
 
Ref.
5370
Caliber
CHR 29-535 PS
Complication(s)


 
 
Ref.
5270
Caliber
CH 29-535 PS Q
Complication(s)



 
 
Ref.
5524
Caliber
324 S C FUS
Complication(s)


 
 
Ref.
5153
Caliber
324 S C
Complication(s)


 
 
Ref.
5711/1
Caliber
324 S C
Complication(s)


 
 
Ref.
5124
Caliber
25-21 REC PS
Complication(s)


 
 
Ref.
4947
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
4947
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
4948
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
4948
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
7200/1
Caliber
240
Complication(s)


 
 
Ref.
7118/1200
Caliber
324 S C
Complication(s)


 
 
Ref.
7118/1200
Caliber
324 S C
Complication(s)


 
 
Ref.
7118/1
Caliber
324 S C
Complication(s)


 
 
Ref.
4897
Caliber
215
Complication(s)


 
 
Ref.
5067
Caliber
E23-250 S C
Complication(s)


 
 
Ref.
5227
Caliber
324 S C
Complication(s)


 
 
Ref.
5539
Caliber
R TO 27 PS
Complication(s)


 
 
Ref.
6002
Caliber
R TO 27 QR SID LU CL
Complication(s)


 
 
Ref.
7042/100
Caliber
215
Complication(s)


 
 
Ref.
7042/100
Caliber
215
Complication(s)


 
 
Ref.
5374
Caliber
R 27 Q
Complication(s)



 
 
Ref.
5204
Caliber
CHR 29-535 PS Q
Complication(s)



 
 
Ref.
5950
Caliber
CHR 27-525 PS
Complication(s)


 
 
Ref.
5959
Caliber
CHR 27-525 PS
Complication(s)


 
 
Ref.
6300
Caliber
300 GS AL 36-750 QIS FUS IRM
Complication(s)


 
 
Ref.
5327
Caliber
240 Q
Complication(s)



 
 
Ref.
5327
Caliber
240 Q
Complication(s)



 
 
Ref.
5327
Caliber
240 Q
Complication(s)



 
 
Ref.
5230
Caliber
240 HU
Complication(s)


 
 
Ref.
5230
Caliber
240 HU
Complication(s)


 
 
Ref.
5930
Caliber
CH 28-520 HU
Complication(s)


 
 
Ref.
7122/200
Caliber
215 PS
Complication(s)


 
 
Ref.
7122/200
Caliber
215 PS
Complication(s)


 
 
Ref.
5204/1
Caliber
CHR 29-535 PS Q
Complication(s)



 
 
Ref.
6104
Caliber
240 LU CL C
Complication(s)


 
 
Ref.
5131
Caliber
240 HU
Complication(s)


 
 
Ref.
5078
Caliber
R 27 PS
Complication(s)


 
 
Ref.
5316
Caliber
R TO 27 PS QR
Complication(s)



 
 
Ref.
5372
Caliber
CHR 27-525 PS Q
Complication(s)



 
 
Ref.
5372
Caliber
CHR 27-525 PS Q
Complication(s)



 
 
Ref.
5178
Caliber
R 27 PS
Complication(s)


 
 
Ref.
5320
Caliber
324 S Q
Complication(s)



 
 
Ref.
5168
Caliber
324 S C
Complication(s)


 
 
Ref.
4947
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
7118/1
Caliber
324 S C
Complication(s)


 
 
Ref.
7118/1
Caliber
324 S C
Complication(s)


 
 
Ref.
5062/450
Caliber
324
Complication(s)


 
 
Ref.
4899/900
Caliber
240
Complication(s)


 
 
Ref.
4948
Caliber
324 S QA LU
Complication(s)


 
 
Ref.
Star Caliber 2000
Caliber
Star Caliber 2000
Instructions manual
Complication(s)


 
 
Ref.
5002
Caliber
RTO 27 QR SID LU CL
Instructions manual
Complication(s)


 

Adjustment procedure for Sky Moon Tourbillon

Adjustment procedure for Sky Moon Tourbillon

Adjustment procedure for the Celestial

Adjustment procedure for the Star Caliber 2000

  • On sky side
    • Moonphase revolution: Loading...
    • Moon adjustments
      • Large divisions: Loading...
      • Small divisions: Loading...
    • Sky adjustments
      • Large divisions: Loading...
      • Small divisions: Loading...
  • On dial Side
    • Leap year cycle: Loading...
    • Day of the week: Loading...
    • Date Loading...
    • Month Loading...
    • Moon age: Loading... (Loading... pushes)




Sky Moon Tourbillon Ref. 5002 - Adjustments procedure

Please wind your watch by hand before correcting any of the displays. To prevent damage to your watch, perform all settings and corrections involving the corrector buttons with the setting stylus that was delivered with your Sky Moon Tourbillon. All settings and corrections must be performed in the specified order.

1. Adjustments of the perpetual calendar and the moon age (dial side)

1.1. Preparatory steps:

Gently pull the winding crown at 4 o’clock out and rotate the hands clockwise until the flyback hand of the date display advances by one day. Then set the hands to 6 a.m. Now, activate the corrector button between 11 and 12 o’clock and repeat until the flyback hand points to 1.

1.2. Setting the leap year cycle (subsidiary dial at 12 o’clock) and the month (subsidiary dial at 3 o’clock):

In the program, the line marked “Leap year cycle” gives you the Roman numeral that indicates the year cycle. Leap years are identified with the Roman numeral IV. Activate the corrector button between 3 and 4 o’clock to first set the leap year display and then the month display.

1.3. Setting the date (flyback hand):

The date is set with the corrector button between 11 and 12 o’clock. You will note that the date hand and the day of the week display advance simultaneously. The day of the week can be corrected in the next step.

1.4. Setting the day of the week (subsidiary dial at 9 o’clock):

Activate the corrector button between 6 and 7 o’clock to set the day of the week.

1.5. Setting the moon age (subsidiary dial at 6 o’clock):

Use the corrector button between 5 and 6 o’clock to advance the hand until it points to the full moon. In the program, the line marked “Moon age” tells you how many times you have to activate the corrector button to obtain the correct moon age display.

2. Adjustments of the sky/moon mechanism (sky side)

This mechanism is corrected with the second crown at 8 o’clock on the 24-hour dial with the sky chart facing up and the crown on the right-hand side. Turning the crown clockwise corrects the sky chart and sidereal time. Turning it counterclockwise corrects the moon.

2.1. Setting the moon and the moon phase:

When the moon phase display indicates a full moon, align the moon index with the meridian (S). In the program, the line marked “Moon phase” tells you how many revolutions the moon must perform to obtain the correct moon phase display setting. Advance the moon index by that number of revolutions. In the program, the lines marked “Moon” tells you the number of large and small graduations by which you must advance the moon index. This completes the moon setting procedure.

2.2. Setting the sky:

Align the sky index with the meridian (S). In the program, the lines marked “Sky” tells you the number of large and small graduations by which you must advance the sky index. This completes the sky setting procedure.

 

Sky Moon Tourbillon Ref. 6002 - Adjustments procedure

Please wind your watch by hand before correcting any of the displays. To prevent damage to your watch, perform all settings and corrections involving the corrector buttons with the setting stylus that was delivered with your Sky Moon Tourbillon. All settings and corrections must be performed in the specified order.

1. Adjustments of the perpetual calendar and the moon phase (dial side)

1.1. Preparatory steps:

Gently pull the winding crown at 4 o’clock out and rotate the hands clockwise until the flyback hand of the date display advances by one day. Then set the hands to 6 a.m. Now, activate the corrector button between 11 and 12 o’clock and repeat until the flyback hand points to 1.

1.2. Setting the leap year cycle (subsidiary dial at 12 o’clock) and the month (subsidiary dial at 3 o’clock):

In the program, the line marked “Leap year cycle” gives you the Roman numeral that indicates the year cycle. Leap years are identified with the Roman numeral IV. Activate the corrector button between 3 and 4 o’clock to first set the leap year display and then the month display.

1.3. Setting the date (flyback hand):

The date is set with the corrector button between 11 and 12 o’clock. You will note that the date hand and the day of the week display advance simultaneously. The day of the week can be corrected in the next step.

1.4. Setting the day of the week (subsidiary dial at 9 o’clock):

Activate the corrector button between 6 and 7 o’clock to set the day of the week.

1.5. Setting the moon phase (subsidiary dial at 6 o’clock):

Press the corrector button between 5 and 6 o’clock to advance the lunar disk until it shows a full moon. On the left side of your screen, consult the lunar calendar to determine the number of days that have elapsed since the last full moon. Then perform the correction (1 actuation of the button for every elapsed day, but not counting the day of the last full moon).

2. Adjustments of the sky/moon mechanism (sky side)

This mechanism is corrected with the second crown at 8 o’clock on the 24-hour dial with the sky chart facing up and the crown on the right-hand side. Turning the crown clockwise corrects the sky chart and sidereal time. Turning it counterclockwise corrects the moon.

2.1. Setting the moon and the moon phase:

When the moon phase display indicates a full moon, align the moon index with the meridian (S). In the program, the line marked “Moon phase” tells you how many revolutions the moon must perform to obtain the correct moon phase display setting. Advance the moon index by that number of revolutions. In the program, the lines marked “Moon” tells you the number of large and small graduations by which you must advance the moon index. This completes the moon setting procedure.

2.2. Setting the sky:

Align the sky index with the meridian (S). In the program, the lines marked “Sky” tells you the number of large and small graduations by which you must advance the sky index. This completes the sky setting procedure.

Star Caliber 2000 - Instructions for setting the perpetual calendar and the sky/moon mechanism

1. Situation 1: Your watch stopped less than four days ago.

a. First, wind the watch.
b. Then set the perpetual calendar and the correct time with the winding crown.
c. Setting the sky/moon mechanism:
Below gives the information you need to position the sky and moon indices as well as the number of moon revolutions required to set the moon-phase display. These settings are performed with the rotating bezel.

1.1. Moon and moon-phase settings

- Set the moon phase to full moon and then align the moon index with the meridian (M).
- In the program window, "Moon phase revolutions" indicates the number of dial revolutions the moon has yet to compete to indicate the correct moon phase.
- Using the rotating bezel, advance the moon index by that number of revolutions.
- In the program window, "Moon adjustments" indicates the number of large and small graduations (divisions).
- Advance the moon index by that number of graduations (divisions). This completes the moon function setting procedure.

1.2. Sky settings

- Align the sky index with the meridian (M).
- In the program window, "Sky adjustments" indicates the number of large and small graduations.
- Advance the sky index by that number of graduations (divisions). This completes the sky function setting procedure.

2. Situation 2: Your watch stopped more than four days ago.

a. First, wind the watch. b. Then set the perpetual calendar. - Each time the rapid correction slide is operated, the calendar displays are advanced by nearly one full month without changing the relative settings of the perpetual calendar, the running equation of time, and the sunrise, sunset, and season indications.
- Release the slide one or two days before the desired date is displayed. The slide is automatically returned to its home position by a spring.
- Complete the date setting by activating the corrector at 12 o’clock with the setting stylus as many times as needed until the correct date is indicated.
- When the correct date is displayed, activate the corrector at 4 o’clock until the correct day of the week is displayed.

2.1. Moon and moon-phase settings

- Set the moon phase to full moon and then align the moon index with the meridian (M).
- In the program window, "Moon phase revolutions" indicates the number of dial revolutions the moon has yet to compete to indicate the correct moon phase.
- Using the rotating bezel, advance the moon index by that number of revolutions.
- In the program window, "Moon adjustments" indicates the number of large and small graduations.
- Advance the moon index by that number of graduations. This completes the moon function setting procedure.

2.2. Sky settings

- Align the sky index with the meridian (M).
- In the program window, "Sky adjustments" indicates the number of large and small graduations.
- Advance the sky index by that number of graduations. This complete the sky function setting procedure.

Celestial Ref. 5102, 6102, 6103 & 6104 - Adjustment procedure

Please, wind your watch by hand before correcting any of the displays. All settings and corrections must be performed in the specified order.

1. Setting the Moon and the Sky

1.1. Moon phase

The moon is set by pulling the crown situated at 4 o’clock and by turning it clockwise. By turning the crown, position the full Moon facing the letter "S" (an arrow-shaped index under the moon will help you position it accurately). This may require up to 28 revolutions! In the program, the first line entitled “Moon phase Revolution” will indicate how many revolutions of the dial the Moon has yet to complete before its phase will match the current date. (For example, if it is number “5”, you will need to make the Moon index go by the letter “S” 5 times).

In order to set the Moon phase according to the exact time, you will need to wind the same crown, in the same direction, until the Moon index covers x large and y small graduations on the bezel scale. (Indicated in the program by “Moon - large” and “Moon - small”).

1.2. Setting the sky

The Sky is set by pulling the crown at 4 o’clock and winding it counter-clockwise. Position the Sky index (small arrow on the Milky Way) facing the “S”. Wind the crown until the index has covered the large and small number of graduations indicated by the program (Sky - large; Sky - small). The graduations are found on the bezel of the watch. When the setting is complete, do not forget to push back the crown to its initial position.

2. Setting the time

The time is set by pulling the crown situated at 2 o’clock and by turning it in any direction. The crown must be pushed in again when setting is completed.


Settings

How to set the moonphase indicator?

fullmoon calendar
fullmoon calendar
fullmoon calendar
fullmoon calendar
fullmoon calendar
fullmoon calendar
fullmoon calendar
A disc, decorated with golden stars and two golden moons against a blue or white background representing the sky, rotates within an aperture. The disc is cut from a wafer of corundum crystal (sapphire).

Gold was condensed onto the disc by means of a vacuum process through a photographic mask to create the shape of the moons and stars.  The aperture is cut at its upper edge in order to represent the lunar cycle.

During the first days of each lunation, the leading edge of a golden moon becomes visible as a crescent on the right of the aperture and appears to wax as it emerges beyond the curved edge of the aperture representing the lunar terminator.

Half way through the lunation, the moon appears full. It then wanes as it disappears behind the terminator on the left of the aperture.

As the moon vanishes, the second moon on the disc is ready to appear on the right.

How to set the leap year indicator

The leap year indicator informs you about the year cycle: leap year or non leap year. Leap years are identified with the Roman numeral IV or the Arabic numeral 4.
Please select a year and press "Calculate" to find the year cycle.
2017
Year I
2018
Year II
2019
Year III
2020
Year IV
2021
Year I
2022
Year II
2023
Year III
2024
Year IV
2025
Year I
2026
Year II
2027
Year III
2028
Year IV

We use cookies to deliver website functionality and analytics as described in our cookie policy and to ensure that we give you the best experience on our website. By continuing to use our website without changing the settings, you are agreeing to our use of cookies.

OK